Blue
Red
Pink
Black
Blue
Red
Pink
Black

Candy 1

  • Lightweight composite body
  • Stamped steel wings
  • Ribbed body for better traction when unclipped
  • 4-sided entry / superior mud shedding
  • Customizable float & release angle
  • Premium bearings & double seal system
  • Owners Manual and Technical Documents here

gravel

trail

xc

$59.99 USD
/
  • Add Shoes & Save 20% Using Code: MATCHBUNDLE
  • Free Cleat Tool included with purchase
Color
  • In stock, ready to ship
  • Inventory on the way

Body Material One piece composite

Body Dims (L x W) 67mm x 74mm

Wing Material Stamped steel

Spindle Length 52mm

Inner Bearing Type Igus LL-glide bearing

Outer Bearing Type Enduro cartridge bearing

Endcap Slotted

Spindle Material Forged SCM 435 Chromoly Steel

Spring Material 300 series stainless steel

Max Rider Weight No restriction

Weight 294g per pair

Included Cleat Type 10° Easy Release, 6° Float

Cleat Notice Third-party cleats are not approved for use with Crankbrothers pedal systems. Using non-Crankbrothers cleats can reduce pedal lifespan and voids the pedal warranty.

Warranty 5 years

View our 30-Day Return Policy here

Cleats: CUSTOMIZE YOUR FLOAT & RELEASE ANGLE

Choose our new Easy Release cleats with a forgiving 10° release, or our Standard Release cleats with 15° release optimized for intermediate to advanced riders.
Continue reading
Back to Candy Pedals Featured Collection

FAQ - Clip-In Pedals

All Crankbrothers clip-in pedal systems contain two pedals (one left pedal, one right pedal), one pair of cleats with mounting hardware, and one Crankbrothers icon sticker. In addition, some models of our clip-in pedals come with traction pads for customization.

Most Crankbrothers clip-in pedals come with our 6-degree float, Standard Release cleats. Our Candy 1, Eggbeater 1, and Double Shot 1 pedals come with our Easy Release cleats instead, with a smaller release angle required to unclip but still featuring 6 degrees of float.

Although closely related, float and release angle refer to separate characteristics of our cleats. "Float" is what we call the amount of rotational free play while clipped-in, whereas "Release Angle" refers to the angle of rotation of the cleat required to completely exit from the pedal, ie "unclip".

All standard bicycle pedal spindles are threaded specifically for either the left or right side of your bike, ours included - it's important to double check you're installing the correct pedal to the matching crank arm to avoid damage. A close inspection of the flange of the pedal spindle will indicate either Left side (with a grooved flange) or Right side (with a flat flange).

You'll need an 8mm hex wrench and bike grease for proper installation of your pedals - watch our tutorial here!

Maintenance schedules can vary greatly depending on riding conditions and mileage, but as a general rule of thumb, we recommend a seasonal re-grease of the internal components to keep things running smoothly. We also offer refresh kits with new bearings, seals, and hardware when a full overhaul is desired. Pro tip: Avoid using a pressure washer at close distances to clean your pedals, as water could get past the external seals and displace the grease your pedals need to spin freely.

No - SPD cleats won't work with our pedals.

Although we always recommend using Crankbrothers shoes featuring MATCH Technology for an optimized setup right out of the box, any MTB or Gravel shoes which feature a recessed two-hole cleat mounting box are compatible with our pedal system. With third-party footwear, it may be necessary to use additional shims or traction pads to fine-tune the shoe-to-pedal interface [pro tip: use our Cleat Tool to find your ideal shim setup]. In addition, you can even adapt a three-hole road shoe to be compatible with our Eggbeater or Candy pedals with the use of our adapter kit.

Product Support

Support Documents